Summary :

Xbox 360 Controller

How to connect Xbox 360 controller to PC? This article from MiniTool volition show you lot how to connect a wired or wireless Xbox 360 controller to a Windows PC especially for Windows 10 users. If you want to use your Xbox 360 controller on a Windows PC, check out this post now.

Quick Navigation :

  • Connect a Wired Xbox 360 Controller to a Windows PC
  • Connect a Wireless Xbox 360 Controller to a Windows PC
  • Bottom Line
  • User Comments

The first part will show you how to connect an Xbox 360 wired controller to a Windows PC with detailed steps. If you use a wireless Xbox 360 controller, y'all can skip straight to the second part to connect the Xbox 360 controller to a Windows PC wirelessly.

Connect a Wired Xbox 360 Controller to a Windows PC

If you are using a Xbox 360 wired controller, yous can follow these steps to install your Xbox 360 wired controller on Windows 10.

Stride 1. Plug the USB connector of your Xbox 360 controller into any USB 2.0 or 3.0 port on your Windows PC.

Footstep 2. And then Windows ten volition automatically install drivers for the Xbox 360 controller. Just wait patiently and Windows will download or install the related driver software very rapidly.

Step three. When you meet the pop-upward notification that shows the drivers have been installed, you lot can utilise your controller immediately.

Step 4. Open a game that support your controller and and then printing a button, pull a trigger, or motility a stick on the controller to test if your controller works properly.

Tip:

  • If the Xbox 360 wired controller is not detected by your Windows PC, try re-plugging information technology into a different USB port, and then try again.
  • If your controller still does not work, try installing latest Windows updates and then try again.

Connect a Wireless Xbox 360 Controller to a Windows PC

If y'all own a wireless Xbox 360 controller, you can connect the Xbox 360 wireless controller to a Windows PC with an Xbox 360 Wireless Gaming Receiver. So yous can follow the steps below to setup a wireless Xbox 360 controller on a Windows PC and to play games with information technology.

Footstep i. Prepare an Xbox 360 wireless gaming receiver. If you don't have 1, you tin purchase a wireless receiver on Amazon, which may toll you most $x to $20.

Step 2. Insert the gaming receiver's USB connector into an USB two.0 port on your Windows calculator.

Note: If USB ports on the front of your computer doesn't piece of work, effort using one of the ports on the back of your computer.

Footstep 3. One time it is plugged in, you will see a green light appeared on the receiver, which indicates that the unit is working properly.

Step 4. Install software to make sure the gaming receiver and the wireless Xbox 360 controller to properly sync with i another.

  • If the Add New Hardware Magician automatically appears on your PC, select Install the software automatically (Recommended), and and then select Adjacent. And then follow the prompts to install the software driver.
  • If the wizard fails to install the software, use the installation disc that came with your Xbox 360 Wireless Gaming Receiver to install the software from the disc. Insert it into your Windows PC's main optical drive and follow the on-screen education to end the installation.
  • If you don't accept the disc, you can install the software by downloading information technology from the Xbox 360 Wireless Controller for Windows link. The Windows 7 drivers will as well work for Windows 8 and Windows x. Merely select the proper operating system and language, and click the Download button.

Annotation: You may exist required to restart your computer afterwards the installation is completed.

Pace 5. And so you need to plow on the Xbox 360 wireless controller. Press and hold the Xbox Guide push button to plow on it.

Step 6. On the gaming receiver, press the Connect button. Information technology is a small circular push button located near the middle of the receiver.

Pace 7. The lights on the controller and on the receiver will wink dark-green, which indicate that the device is trying to establish a connexion. When the lights end flashing and one of the lights around the Guide button remains lit, this ways that the controller is connected.

You tin can press the controller's buttons, pull the triggers and movement the stick to ensure the controller is performance properly. After that, y'all can relish the games on your Windows PC.

xbox 360 emulator thumbnail

This article will show yous top iii Xbox 360 emulators that can exist used on Windows PC. With Xbox 360 emulators, yous can play Xbox games on your Windows PC directly.

Bottom Line

The above is all you need to do if you desire to connect an Xbox 360 controller to a Windows PC. And depending on what Xbox 360 controller you apply, the steps tin can be rather simple. Now open up a game that supports the Xbox 360 controller and whether if your controller works properly.

If you are using Xbox One controller and desire to know how to connect Xbox Ane controller to a Windows PC, you may check out this post listed beneath.

connect xbox one controller to pc thumbnail

This post will show you how to connect Xbox One controller to PC with 3 different methods. If yous want to use Xbox One controller on PC, check out the post at present.