How To Set Up Tempur Pedic Adjustable Base

TEMPUR-Ergo® Smart Base of operations
Powered by Sleeptracker® AI

OWNER'Southward Transmission
Tempur-Pedic Customer Service U.S.: 1-844-309-3597

rubber precautions and usage statements

Attention: Important Condom Disclaimers
Read all instructions before using your TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® Arrangement adjustable base.

SAVE THESE INSTRUCTIONS.
To reduce the adventure of shock, burns, fire or injury:
Always unplug the base from the electrical outlet before servicing any part of the base. To reduce the take chances of electrical shock, unplug the base before cleaning. To safely disconnect, ensure the base of operations is in a flat position with all motors off, and unplug from the power source.
Continue the ability cord away from heated surfaces. Never operate the base of operations when the air openings are blocked. Keep air openings gratuitous of lint, hair, and the similar. Practice not drop or insert any object into any opening.
Discontinue use of the bed base and contact a qualified service center if it has a damaged cord or plug, is non working properly, or has been dropped into h2o.
Simply use this bed base for its intended use equally described in this manual.
Do not use accessories/attachments that are not recommended by the manufacturer.
Close supervision is required when the bed base is used past or near children, convalescents or disabled persons.

Outlet Safety:
For optimal safety and functioning, plug the bed base into a surge protector (not included).
The bed base should only be plugged directly into a wall outlet or surge protector (recommended). Improper connectedness of the equipment can event in the take a chance of electrical shock, electric fire, or faulty performance of this bed base of operations. If the plug does non fit your outlet, contact a qualified electrician to install a suitable outlet. Unauthorized modification or failure to utilise a wall outlet or surge protector could void the electric portion of your warranty.

Warranty Warning:
Do non open or tamper with the command box, motors, or remote (with the exception of battery compartments). The warranty will be void if the internal workings of these components are tampered with. For consummate warranty information refer to the warranty information section on pages 12-13.
In-Abode Utilize and Hospital Disclaimer:

The Tempur-Pedic ERGO™ + SLEEPTRACKER® SYSTEM adaptable bases are designed solely for in-domicile utilize. This base was not designed every bit a infirmary bed and is not designed to come across hospital standards. Do not employ this base with TENT Type oxygen therapy equipment or near explosive gases.
Pets and Modest Children:
Children and pets tin be crushed or killed if they become entrapped in moving parts of the bed. Before you reposition the base, bank check to be sure children and minor pets are not near or under the base. Do non teach children to operate the remote.
Immediately dispose of all packaging materials as they may pose a smothering risk to small-scale children and pets.
Condom Features:
Transmission operation – If something gets caught in the platform when flattened, you can manually raise the platform upwardly past lifting at both the head and foot to salvage pressure level and allow for release.
Child-lockout – This remote control is programmed with a child-lock safe characteristic. Data on activation and deactivation of this feature can be establish on the Remote Control page(s) and on the back of your remote control.
Emergency stop – Stop the motion of the platform by pressing whatsoever push button on the remote control or by pushing the button on the Battery Backup Box located underneath the base.
Power outage – Use the "Emergency Battery Backup Box" as a temporary power source to get the base to the desired position. Instructions on how to operate the Bombardment Backup Box are on the Emergency Bombardment Backup page(southward).

Power Ratings:

INPUT: AC 100–240V 50/60 HZ ii.0A
OUTPUT: DC 29V two.0A
WATTS: 58W

Product Ratings:
The lift motors are non designed to operate continuously for more than two [2] minutes in an 18 [18] minute time period or approximately 10% duty cycle. Attempting to circumvent or exceed this rating will shorten the life expectancy of the product and may void the warranty.
The massage motors are not designed to operate continuously for more than 30 minutes at a time. Delight allow the massaging system to rest for 30 minutes after automatic massage shut off before restarting.
Weight Limits:
The recommended weight limits on the TEMPUR-PEDIC ERGO™ +SLEEPTRACKER® SYSTEM are:
Twin Long / Full / Queen / Rex / Separate CA King / CA King: 700 pounds.
The maximum weight the bed can support per person is 275 pounds with the weight evenly distributed across the caput and foot sections. This product is non designed to back up or elevator this corporeality of weight in the head or foot sections alone. Annotation: Exceeding the recommended weight restrictions could damage your TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM and void your warranty. For all-time performance, you should enter and exit the TEMPURPEDIC ERGO™ + SLEEPTRACKER® Arrangement while information technology is in the flat or fully lowered position.
TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® Arrangement fits easily inside bed frames, furniture beds and platform beds that are certified to hold a minimum of 900 pounds. If using this adjustable base of operations without the legs and placing directly on a bed frame or platform bed, cross-bed supports (slats) are strongly recommended to ensure TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM maintains stability during operation.

Exceeding this weight restriction could damage the bed and/or cause injury and will void the warranty.
Acoustics:
In normal base operation the wheels, which allow the bed to maintain its distance from the wall, volition make contact with the steel platform supports of the base creating a contact noise. When entering, exiting or shifting weight on the base, this contact noise may be audible as the wheels make contact.
This is normal.

Fabric Care:
To prolong the life of your fabric, protect information technology from direct sunlight whenever possible. For spot cleaning, wipe the expanse with a lightly clammy sponge or vacuum with a soft castor attachment to remove particles. Go along at a minimum of 30cm (12 inches) abroad from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry material. Wipe with a clean cloth dampened with warm h2o. Practise not wet excessively. A soft bristle brush may be used to remove ingrained soil. Avoid scratching by gentle brushing.
Wipe with a clean cloth dampened with warm water to remove residues after brushing. Dry in shade abroad from direct heat.
If persistent marks remain visible afterwards cleaning, seek professional communication.

FCC Compliance:
Note: This equipment has been tested and constitute to comply with the limits for a Form B digital device, pursuant to part fifteen of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and tin can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may crusade harmful interference to radio communications. All the same, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television receiver reception, which can exist determined by turning the equipment off and on, the user is encouraged to try to right the interference by ane or more than of the post-obit measures:

• Reorient or relocate the receiving antenna.
• Increment the separation betwixt the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Television set technician for assistance.

CAN ICES-three (B)/NMB-3(B)
Tempur-Pedic® Sleeptracker® Organization

For Tempur-Pedic Ergo™

System Components
Sleeptracker Sleep Monitoring Organisation Model STS-twoscore / STS-40A:
– One Sleeptracker Processor Units
– Ane or two Sleeptracker Sensors*
Sleeptracker Smart Cablevision Model STC-10
Quick Start Carte du jour with QR lawmaking
Safety and Warranty Information
*Note: the number of sensor units included depends on the particular
Tempur-Pedic Ergo + Sleeptracker Organisation size purchased.
Specifications
Sleeptracker Sleep Monitoring System Model STS-xl / STS-40A:
– Input ability: 5V DC, 500mA
– Wi-Fi mode: 802.11 b/thousand/n two.4G Ring
– Wi-Fi frequency range: 2412.0–2462.0 MHz
– Wi-Fi AP broadcast: ii.4GHz
– Wi-Fi AP channel: Variable, 1 through 11.
Channel selection is performed by scanning the expanse to cull a non-overlapping channel.
– Wi-Fi output power: 0.25 watts
Sleeptracker Smart Cable Model STC-ten: – Input power: 29V DC, 100mA
– Output power: 5V DC, max 500mA
Certifications:
– FCC Role 15B, FCC Function 15C
– Manufacture Canada ICES-003, RSS-210
© 2022 Tempur Sealy International, Inc.
All rights reserved. Tempur-Pedic is a registered trademark of Tempur Sealy
International, Inc. Tempur-Pedic Ergo and Tempur-Pedic Ergo Extend are trademarks of Tempur Sealy International, Inc.
© 2005–2019 Fullpower Technologies, Inc.
All rights reserved. U.South. and international patents granted and awaiting.
Sleeptracker is a trademark of Fullpower Technologies, Inc., registered in the U.S. and other countries.

For assistance visit our web site: world wide web.sleeptracker.com
Services and app availability are discipline to change at any time, may not be available in all areas and may crave dissever subscriptions.
This product is not a medical device and should not be used to diagnose or treat any medical condition.
Designed in Santa Cruz, California
Made in Prc

System Requirements:

•  Mobile device running iOS or Android
•  Existing Wi-Fi network

Requires Tempur-Pedic® Sleeptracker® app from Fullpower Technologies, available on the Apple tree App Store or on Google Play. Requires Wi-Fi connection to your home network, and Net access via a router or modem.
Apple and the Apple tree logo are trademarks of Apple Inc., registered in the U.Southward. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Google Play, Android, and the Google Play logo are trademarks of Google Inc.
100–240 V AC fifty/60 Hz
Contains either transmitter module FCC ID: H8N-WLL6540, IC: 1353A-WLL6540 (or) FCC ID:2AF2O-FPM20, IC: 20700-FPM20

Tempur-Pedic Due north America, Inc.
g Tempur Way
Lexington, KY 40511
Tempur-Pedic Canada
145 Milner Ave.
Scarborough, Ontario M1S 3R1

FCC Certification Statement
This equipment complies with Part 15 of the FCC Rules. The performance of this equipment is subject field to the following two atmospheric condition: (1) the equipment may not cause harmful interference, and (2) the equipment must take any interference that might cause undesired operation.
Radio and Television receiver Interference
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and tin radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, in that location is no guarantee that such interference will not occur in a particular installation. If this equipment does crusade harmful interference to radio or television reception, which tin exist adamant past turning the equipment off and on, the user is encouraged to try to correct the interference by taking ane or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and the receiver.
•  Connect the equipment into an outlet on a excursion unlike from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Tv technician for assistance.

Important: Any changes or modifications not expressly canonical by Tempur Sealy International ("Tempur") could void the electromagnetic compatibility compliance and negate your dominance to operate this equipment.
This equipment was tested for FCC compliance under weather condition that included the use of Tempur peripheral devices and Tempur cables and connectors betwixt system components. Information technology is of import that you use Tempur cables and connectors betwixt arrangement components to reduce the possibility of causing interference to radios, television sets, and other electronic devices.
You tin can obtain proper Tempur cables and connectors through a Tempurauthorized dealer.
Responsible political party (contact for FCC matters only):
Tempur-Pedic Northward America, Inc.
1000 Tempur Mode
Lexington, KY 40511
Sleeptracker Slumber Monitoring Organization model STS-40 / STS-40A contains either transmitter module FCC ID: H8N-WLL6540, IC: 1353A-WLL6540 (or) FCC ID:2AF2O-FPM20, IC: 20700-FPM20

Industry Canada Statement of Compliance
This device complies with Manufacture Canada license-exempt RSS standard(s).
Operation is subject to the following 2 weather condition: (1) this device may non crusade interference, and (2) this device must take any interference, including interference that may cause undesired operation of the device. This device complies with ICES-003 Form B specifications of Industry Canada.
Responsible party (contact for Manufacture Canada matters simply):
1390658 Ontario Inc (Tempur Canada)
145 Milner Ave.
Scarborough, Ontario
M1S 3R1
Sleeptracker Sleep Monitoring Organisation model STS-40 / STS-40A contains either IC 1353A-WLL6540 or IC 20700-FPM20.
Exposure to Radio Frequency Energy
This equipment complies with radiation exposure limits set forth in the FCC's OET Bulletin 65 and Industry Canada's RSS-102 standard for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm (nigh 8 inches) between the radiator and your body. This equipment must non be co-located or operating in conjunction with any other antenna or transmitter.
Pacemaker Notice
If you lot utilise a medical device such as a pacemaker or implantable cardioverter-defibrillator (ICD), please consult your md before using this product.

base overview

quick reference guide

Not to scale. For analogy purposes only. Read all instructions before first installation.

remote control

Remote Control arrives paired to the adaptable base. Three (iii) AAA batteries are required to operate the remote.

IMPORTANT!: For your safety, read the possessor's transmission carefully and completely before operating this product.
Electric daze may occur if electrical components are not installed or operated co-ordinate to these guidelines.

MASSAGE

There are 3 possible moving ridge massage modes and 2 intensity levels to choose from. Printing the Wave Massage Way Selector to choose the
desired fashion (1,2, or 3), then use the Head Massage and/or the Pes Massage buttons to cycle through the bachelor intensity levels. Once the massage manner is chosen, information technology will run for thirty minutes unless it is canceled by pressing the Wave Massage Mode Selector push button repeatedly until the message stops.
If one of the wave massage modes is not needed, pressing Head and/or Foot Massage buttons volition initiate massage for those sections and cycle through 2 dissimilar intensity levels equally well as "OFF".

ADJUST

Remote Control arrives paired to the adjustable base. Iii (3) AAA batteries are required to operate the remote.

* Not user-programmable.
‡ Tin can be reprogrammed to user desired position.
The Aught-G, Goggle box in Bed, Anti-Snore, and Favorite 1 in bed presets can exist re-programmed to whatsoever position chosen past the user. Merely suit the bed to the desired position, and so hold any of the 4 buttons down until the remote backlight flashes twice. The button is now re-programmed.
To restore the buttons to their original positions, depress the Ane-touch Flat and Zippo-G buttons simultaneously for 5 seconds. The remote backlight volition flash twice to indicate the original positions have been restored.

PRESET

	Zilch-Thou ‡ Adjusts your legs to relieve pressure off the lower back.
	Apartment * One-Touch Apartment lowers caput and pes to a apartment position and turns off massage (if running).
	TV in Bed Preset Position ‡ Brings caput and human foot into position for viewing TV.
	Anti-Snore Preset Position ‡ Raises the caput of the bed slightly to help open airways.
	Favorite ane Preset Position ‡ Reprogrammable Preset Position.
	Under LED lighting * Turn on/off nether-bed LED lighting.

TANDEM MODE (for Twin XL/Carve up CA King ten ii bases only)
Immediately afterwards installation, the buses volition operate in unison. In order to have both bases operate independently, either download the Tempur-Pedic Sleeptracker app and enable the split arrangement setting during setup, or utilize the remote control to plow Tandem Mode off.
To plough Tandem Way off, printing and hold Apartment + Favorite ane Preset for six (6) seconds. The remote backlight will flash twice. Tandem Fashion is at present off and both bases volition operate independently.
To plough Tandem Style on, printing and hold Apartment + Tv set In Bed Preset for six (half dozen) seconds. The remote backlight will wink twice. Tandem Mode is now on and both bases will operate in unison. This is the factory setting.

Child Lock Feature
Activate Child Lock

Press and agree the HEAD UP and Pes Upward buttons together for iii seconds until the remote backlight flashes twice.
The remote is at present in Child Lock. Pressing whatsoever buttons while in Child Lock volition yield no motion to your adaptable base.

Deactivate Child Lock

remote control pairing

The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that the remote is not paired with the base of operations, follow the steps below.

STEP 1
Locate the battery backup box and printing the button TWICE. A light on the battery backup box will illuminate.

STEP two
Remove the back cover of the remote, press and hold downwardly the PAIR button.
The PAIR button will illuminate bluish and start flashing. When the PAIR button stops flashing, the illuminated light on the battery backup box will become out.
Release the PAIR button. The remote is now paired to the adjustable base.

Pace 3
Test all remote functions. If the remote buttons do not impact the adjustable base movements, please repeat the process again or phone call
Tempur-Pedic customer service: U.S. ane-844-309-3597 | Canada : 1-800-887-4321 | México: 01-722-273-1810

*ALTERNATE REMOTE PAIRING PROCESS
Locate the control box (see a base overview on page 5) and press the button twice. A green LED low-cal will illuminate on the control box. On the back of the remote, press and concur the PAIR button. The PAIR button volition illuminate blue and start flashing. When the PAIR button stops flashing, the dark-green LED light on the control box volition go out. Release the PAIR push. The remote is now paired to the adjustable base.

emergency bombardment fill-in box

Ii (2) 9 Volt batteries are required to operate the battery fill-in box feature and are Not included.

OVERVIEW
For emergency use just, in case of a ability outage.
In the event that the base is stuck in an articulated position during a power outage, the battery backup box will render the base to a flat position. Batteries are not to be used for the normal performance of the base of operations.

STEP i
Install the 9 Volt batteries into the provided battery backup box. Do not mix make-name batteries.

Step ii
Press the button on the battery backup box to lower the base to a apartment position.

troubleshooting

If one or more than functions on the bed base accept stopped operating:

Adjustable BASE

• Check under the bed base of operations to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base.
•  Check to ensure the LED light is illuminated on the command box. If at that place is no calorie-free, verify that the input and power cords are properly connected.
• Unplug the base of operations for 60 seconds to reset the electronic components.
•  Plug bed base into a different electrical outlet, or test the current outlet with another working apparatus (a grounded, electrical surge protector is recommended).

REMOTE

• Ensure that your remote batteries are properly installed or do not need replacing.
• Ensure the Child Lock feature is not enabled. Run across page viii for more than information.
• Ensure that the remote control is paired to the bed base of operations.

Sleeptracker®

• For support with Sleeptracker® Monitor, please email [email protected]

If your effect is non resolved by following the instructions above, delight locate the serial number on the warranty card or dorsum of the remote control and call the client service team for your region.

warranty information

Limited Warranty for TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® Organisation

TEMPUR-PEDIC® NORTH AMERICA, LCC (TEMPUR-PEDIC® ) WARRANTS THAT It Will, AT TEMPUR-PEDIC® 'S OPTION, REPLACE OR REPAIR PURCHASER'S TEMPUR-PEDIC® ERGO™ + SLEEPTRACKER® SYSTEM MODEL IF IT IS Lacking DUE TO FAULTY WORKMANSHIP OR MATERIALS, Subject field TO THE LIMITATIONS DESCRIBED IN THIS
WARRANTY.
TEMPUR-PEDIC® UNDERTAKES NO RESPONSIBILITY FOR THE QUALITY OF THE GOODS EXCEPT As OTHERWISE PROVIDED IN THIS WARRANTY. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE Clarification ON THE Face up THEREOF.
THIS WARRANTY APPLIES Only TO TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® System MODEL. THIS MODEL MAY Exist IDENTIFIED BY REFERENCE TO THE SERIAL NUMBER ON THE Production.
YEARS 1 THROUGH 3: Full COVERAGE OF PARTS AND LABOR
TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® Organization is warranted against defects in the workmanship or materials for a period of iii (3) years from the warranty commencement engagement. During these first iii years of the warranty, the entire product is and so covered, including manufacturing plant supplied electronics, electrical components, Sleeptracker® components, drive motors, and power supply components. Upon notice during the offset through the third year from the warranty commencement engagement, Tempur-Pedic® will send replacement parts to the purchaser, at no toll, in club to replace any such defective office. In addition, Tempur-Pedic® will pay all authorized labor and transportation costs associated with the repair or replacement of any parts which Tempur-Pedic® determines to be defective. This iii (iii) twelvemonth warranty shall not apply if the purchaser does not return any and all defective parts to Tempur-Pedic® within fifteen days of the purchaser's receipt of such replacement parts furnished. Return of the frame, however, should it need to be replaced, is non required.
In no instance will this warranty cover whatsoever damage attributable to misuse or to normal article of clothing and tear or to excessive weight placed upon the product. Nor will this warranty cover any purchaser other than the original purchaser nor will information technology cover product purchased from an unauthorized tertiary political party. If you are not the original purchaser of this product, yous have "as is" and "with all faults." If you did not buy this TEMPUR- PEDIC ERGO™ + SLEEPTRACKER® System we will require proof of purchase from you demonstrating that you are the original purchaser and are eligible to make a valid claim under this Warranty.
YEARS 4 THROUGH 5: Full COVERAGE OF PARTS ONLY
Upon discover during the years four (iv) and five (5) from the warranty starting time date, Tempur-Pedic® will offering replacement parts for any defective parts to the purchaser.
Manufacturing plant supplied electronics, electrical components, Sleeptracker® components, drive motors, and ability supply components are included. This two (2) twelvemonth Warranty shall non utilize if the purchaser does not return whatever and all defective parts to Tempur-Pedic® within 15 days of the purchaser's receipt of the replacement part. Purchaser shall bear all service, transportation, labor, and shipping costs related to the commitment and/or replacement of the defective part.

FRAME Only – YEARS 1 THROUGH 25 WARRANTY
Notwithstanding the above, Tempur-Pedic® extends a 25 Twelvemonth Warranty on the frame itself used in this product. Specifically, Tempur-Pedic® warrants that for a full 25 years, whatever defect in the workmanship or the materials used in the frame itself shall exist covered.
In the outcome of a frame defect, full product replacement will be offered. For purposes of this 25 Year Warranty, the frame consists of the metal structure of the base of operations and specifically excludes its cover, its side rail, decking and legs, actuator lift and massage motors, control box, remote controls, ability supply, Sleeptracker® components, and any ability supply cords.
ADDITIONAL TERMS AND CONDITIONS
In no instance will this warranty cover any damage attributable to misuse or to normal clothing and tear or to excessive weight placed upon the product. Nor volition this warranty cover any purchaser other than the original purchaser nor will information technology encompass product purchased from an unauthorized 3rd party. If yous are not the original purchaser of this production, y'all accept "as is" and "with all faults." If you did not purchase this TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM directly from Tempur-Pedic® we will require proof of purchase from you demonstrating that you are the original purchaser and eligible to make a valid merits nether this Warranty.
This Warranty does not include coverage for damage caused by the purchasers or by other users if the production has been used in a manner inconsistent with the operation and maintenance procedures outlined in the Complete Reference Guide, this Warranty, or any other applicative document published or approved by Tempur-Pedic®. Nor does information technology include coverage if the product has been repaired or modified by the purchaser or by an unauthorized third political party or if the product has been damaged in transit. This Warranty does not apply to damage to mattresses, fabric, cables, electrical cords, or items supplied by Resellers, as defined beneath. Contact the Reseller or other advisable party for warranty information on these items. Nor does this Warranty apply to any unnecessary service calls, including costs for in-domicile service calls solely for the purpose of educating the consumer about the unit or finding an unsatisfactory ability connection. In add-on, if the recommended weight restrictions are non followed (Queen, Twin Long, and Split/ Dual CA King bases – upwardly to 850 lbs. each height limit and up to 700 lbs. operating limit) this warranty is void.
Replacement parts may be new or reconditioned at Tempur-Pedic® 'due south discretion.
Except for the 25 Year Warranty provided for the frame of this product, at that place is no warranty at all later 5 years, dating from the commencement of this Express Warranty.
ADDITIONAL LIMITATIONS ON WARRANTY COVERAGE
In the event, a warranty claim is filed and a warranty replacement is accounted necessary, the purchaser will be required to surrender the original production, including whatever components, to Tempur-Pedic® at the time of the replacement. Return of the frame, even so, should it need to be replaced, is not required.

warranty information

Repairs to or replacement of the TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM model or its components under the terms of this Limited Warranty will apply to the original warranty period and volition not serve to extend such flow. This Warranty begins on the "warranty commencement date" which is the date of purchase for new unused products.
If you did not buy this TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM model directly from Tempur-Pedic®, proof of purchase will be required to demonstrate that you are the original purchaser and eligible to make a valid merits under this Warranty.
If original proof of buy is not provided by the purchaser, Tempur-Pedic® reserves the correct to determine if the unit is covered, or is not covered, by this Warranty and may use the manufacturing date as the warranty start date.
The decision to repair or to supplant defective parts under this Express Warranty shall exist made by Tempur-Pedic® at its choice and at its sole discretion. Except for the Warranty provided for the frame of this product, at that place is no warranty at all later on five years, dating from the get-go of this Express Warranty.
TEMPUR-PEDIC® SHALL NOT Exist LIABLE FOR INCIDENTAL OR CONSEQUENTIAL Amercement RESULTING FROM THE Utilise OF THIS PRODUCT OR ARISING OUT OF Whatever BREACH OF THIS WARRANTY. THE Exclusive REMEDY FOR Breach OF THIS WARRANTY SHALL BE REPLACEMENT OR CREDIT TOWARDS REPLACEMENT AS Gear up FORTH HEREIN. There ARE NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING Implied WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A Detail PURPOSE, OTHER THAN THE WARRANTY DESCRIBED ON THE Face up OF THIS LIMITED WARRANTY.
Some states do not let the exclusion or limitation of incidental or consequential amercement, and then the above limitation or exclusion may non employ to every purchaser. This Warranty gives the purchaser specific legal rights, and the purchaser may also have other legal rights, which may vary from state to state.
If y'all the purchaser experience any trouble with your TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM during the warranty menses, please consult the troubleshooting department of your Reference Guide. If the problem persists, please contact Tempur-Pedic® 's Customer Service Department by calling cost-free 1-844-309-3597 or by sending an email to [email protected]
PLEASE RETAIN THIS WARRANTY PAPERWORK AND ORIGINAL SALES RECEIPT FOR Easy FUTURE REFERENCE AND DOCUMENTATION.
This Warranty is valid in all 50 states, Puerto Rico and Canada.
V001_R03_3/2019

IF YOU Have ANY Bug WITH YOUR Adjustable Base Inside THE WARRANTY PERIOD, Please REFER Back TO THE INSTRUCTIONS IN THIS USER MANUAL. IF YOUR Bug PERSIST, PLEASE Call TEMPUR-PEDIC Customer SERVICE:
Please accept your receipt ready and available.
TEMPUR-PEDIC Customer SERVICE Cost-FREE NUMBER:
U.S. one-844-309-3597 | CANADA : 1-800-887-4321
MÉXICO: 01-722-273-1810
Thanks AND ENJOY YOUR TEMPUR-PEDIC ERGO™ + SLEEPTRACKER® SYSTEM
Adaptable Base.
Serial Number:________________________________
(Place your serial number hither for ready reference.)

©2017 Tempur Sealy International

V002_R4_07/2020

Documents / Resource

References

Source: https://manuals.plus/tempur-pedic/ergo-smart-base-powered-by-sleeptracker-ai-manual

Share this post